Person: mrm5

Article

Vadillo, D and Tuladhar, TR and Mulji, AC and Mackley, MR (2010) The rheological characterization of linear viscoelasticity for ink jet fluids using piezo axial vibrator and torsion resonator rheometers. Journal of Rheology, 54 (4). pp. 781-795. ISSN 01486055

Dorfling, C. and Hornung, CH and Hallmark, B and Beaumont, R.J.J. and Fovargue, H. and Mackley, MR (2010) The experimental response and modelling of a solar heat collector fabricated from plastic microcapillary films. Solar Energy Materials and Solar Cells, 94 (7). p. 1207. ISSN 09270248

Lord, TD and Scelsi, L and Hassell, DG and Mackley, MR and Embery, J and Auhl, D and Harlen, OG (2010) The matching of 3D Rolie-Poly viscoelastic numerical simulations with experimental polymer melt flow within a slit and a cross-slot geometry. Journal of Rheology, 54 (2). pp. 355-373. ISSN 01486055

Stasiak, J and Mackley, MR and Squires, AM and Castelletto, V and Hamley, IW and Moggridge, GD (2010) Dynamics of shear-induced orientation transitions in block copolymers. Soft Matter, 6 (9). pp. 1941-1947. ISSN 1744-683X

Snoswell, DRE and Kontogeorgos, A and Baumberg, JJ and Lord, TD and Mackley, MR and Spahn, P and Hellmann, GP (2010) Shear ordering in polymer photonic crystals. Physical Review E, 81 (2). pp. 020401-1. ISSN 1539-3755

Hornung, CH and Hallmark, B and Baumann, M and Baxendale, IR and Ley, SV and Hester, P and Clayton, P and Mackley, MR (2010) Multiple Microcapillary Reactor for Organic Synthesis. Industrial & Engineering Chemistry Research, 49 (10). p. 4576. ISSN 0888-5885

Chinesta, F and Ammar, A and Mackley, MR and Cueto, E and Regnier, G and Chatel, S (2009) Modeling nanocomposites: from rheology to forming processes simulation. International Journal of Material Forming, 2 (S1). pp. 141-144. ISSN 1960-6206

Cueto, E and Monge, R and Chinesta, F and Poitou, A and Alfaro, I and Mackley, MR (2009) Rheological modeling and forming process simulation of CNT nanocomposites. International Journal of Material Forming . ISSN 1960-6206

Hassell, DG and Embery, J and McLeish, TCB and Mackley, MR (2009) An experimental evaluation of the formation of an instability in monodisperse and polydisperse polystyrenes. Journal of Non-Newtonian Fluid Mechanics, 157 (1-2). pp. 1-14. ISSN 03770257

Medina, DI and Chinesta, F and Mackley, MR (2009) Heat melding of voided polyethylene microstructures. Polymer, 50 (14). pp. 3302-3310. ISSN 00323861

Hassell, DG and Hoyle, D and Auhl, D and Harlem, O and Mackley, MR and McLeish, TCB (2009) Effect of branching in cross-slot flow: the formation of “W cusps”. Rheologica Acta, 48 (5). pp. 551-561. ISSN 0035-4511

Ma, WKA and Chinesta, F and Mackley, MR (2009) The rheology and modeling of chemically treated carbon nanotubes suspensions. Journal of Rheology, 53 (3). pp. 547-573. ISSN 01486055

Hallmark, Bart and Parmar, Chirag and Walker, David and Hornung, Christian H. and Mackley, Malcolm R. and Davidson, John F. (2009) The experimental observation and modelling of microdroplet formation within a plastic microcapillary array. Chemical Engineering Science, 64 (22). pp. 4758-4764. ISSN 00092509 (In Press)

Mackley, MR (2009) Engineering the future of rheology within the UK. Journal of Non-Newtonian Fluid Mechanics, 157 (3). pp. 145-146. ISSN 03770257

Hassell, DG and Mackley, MR (2009) An experimental evaluation of the behaviour of mono and polydisperse polystyrenes in Cross-Slot flow. Rheologica Acta, 48 (5). pp. 543-550. ISSN 0035-4511

Ma, AWK and Yearsley, KM and Chinesta, F and Mackley, MR (2009) A review of the microstructure and rheology of carbon nanotube suspensions. Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 222 (3-4). pp. 071-094. ISSN 1740-3499

Hornung, Christian H. and Mackley, Malcolm R. (2009) The measurement and characterisation of residence time distributions for laminar liquid flow in plastic microcapillary arrays. Chemical Engineering Science, 64 (17). pp. 3889-3902. ISSN 00092509

Darton, NJ and Hallmark, B and James, T and Agrawal, P and Mackley, MR and Slater, NKH (2009) Magnetic capture of superparamagnetic nanoparticles in a constant pressure microcapillary flow. Journal of Magnetism and Magnetic Materials, 321 (10). pp. 1571-1574. ISSN 0304-8853

Hassell, DG and Mackley, MR (2009) An experimental evaluation of the behaviour of mono and polydisperse polystyrenes in Cross-Slot flow. Rheologica Acta, 48 (5). pp. 543-550. ISSN 0035-4511

Reis, NM and Chirgadze, DY and Blundell, TL and Mackley, MR (2009) The effect of protein-precipitant interfaces and applied shear on the nucleation and growth of lysozyme crystals. Acta Crystallographica Section D-Biological Crystallograpphy, 65 . pp. 1127-1139. ISSN 0907-4449

Hartung, G and Hult, J and Balachandran, R and Mackley, MR and Kaminski, CF (2009) Flame front tracking in turbulent lean premixed flames using stereo PIV and time-sequenced planar LIF of OH. Applied Physics B-Lasers and Optics, 96 (4). pp. 843-862. ISSN 0946-2171

Hoath, SD and Hutchings, IM and Martin, GD and Tuladhar, TR and Mackley, MR and Vadillo, D (2009) Links Between Ink Rheology, Drop-on-Demand Jet Formation, and Printability. Journal of Imaging Science and Technology, 53 (4). ISSN 1062-3701

Scelsi, L and Mackley, MR and Klein, H and Olmsted, PD and Graham, RS and Harlen, OG and McLeish, TCB (2009) Experimental observations and matching viscoelastic specific work predictions of flow-induced crystallization for molten polyethylene within two flow geometries. Journal of Rheology, 53 (4). pp. 859-876. ISSN 0148-6055

Ma, AWK and Chinesta, F and Mackley, MR and Ammar, A (2008) The rheological modelling of carbon nanotube (CNT) suspensions in steady shear flows. International Journal of Material Forming, 1 (2). pp. 83-88. ISSN 1960-6206

Cueto, E and Ma, AWK and Chinesta, F and Mackley, MR (2008) Numerical simulation of spin coating processes involving functionalised Carbon nanotube suspensions. International Journal of Material Forming, 1 (2). pp. 89-99. ISSN 1960-6206

Zheng, MZ and Mackley, MR (2008) The axial dispersion performance of an oscillatory flow meso-reactor with relevance to continuous flow operation. Chemical Engineering Science, 63 (7). pp. 1788-1799. ISSN 00092509

Ma, AWK and Cruz, C and Giner, A and Mackley, MR and Regnier, G and Chinesta, F (2008) Modeling elastic behaviour in functionalized carbon nanotube suspensions. International Journal of Material Forming, 1 (S1). pp. 631-634. ISSN 1960-6206

Scelsi, L and Mackley, MR (2008) Rheo-optic flow-induced crystallisation of polypropylene and polyethylene within confined entry–exit flow geometries. Rheologica Acta, 47 (8). pp. 895-908. ISSN 0035-4511

Chinesta, F and Mackley, MR (2008) Microstructure evolution during liquid–liquid laminar mixing: a kinetic theory approach. International Journal of Material Forming, 1 (1). p. 47. ISSN 1960-6206

Ma, AWK and Chinesta, F and Tuladhar, TR and Mackley, MR (2008) Filament stretching of carbon nanotube suspensions. Rheologica Acta, 47 (4). pp. 447-457. ISSN 0035-4511

Hassell, DG and Mackley, MR and Sahin, M and Wilson, HJ and Harlen, OG and McLeish, TCB (2008) Molecular physics of a polymer engineering instability: Experiments and computation. Physical Review E, 77 (5). ISSN 1539-3755

Hassell, DG and Mackley, MR (2008) Localised flow-induced crystallisation of a polyethylene melt. Rheologica Acta, 47 (4). pp. 435-446. ISSN 0035-4511

Coventry, KD and Mackley, MR (2008) Cross-slot extensional flow birefringence observations of polymer melts using a multi-pass rheometer. Journal of Rheology, 52 (2). pp. 401-415. ISSN 0148-6055

Hallmark, B and Darton, NJ and Han, X and Palit, S and Mackley, MR and Slater, NKH (2008) Observation and modelling of capillary flow occlusion resulting from the capture of superparamagnetic nanoparticles in a magnetic field. Chemical Engineering Science, 63 (15). pp. 3960-3965. ISSN 0009-2509

Hassell, DG and Auhl, D and McLeish, TCB and Mackley, MR (2008) The effect of viscoelasticity on stress fields within polyethylene melt flow for a cross-slot and contraction-expansion slit geometry. Rheologica Acta, 47 (7). pp. 821-834. ISSN 0035-4511

Hallmark, B and Hornung, CH and Broady, D and Price-Kuehne, C and Mackley, MR (2008) The application of plastic microcapillary films for fast transient micro-heat exchange. International Journal of Heat and Mass Transfer, 51 (21-22). pp. 5344-5358. ISSN 0017-9310

Darton, NJ and Hallmark, B and Han, X and Palit, S and Slater, NKH and Mackley, MR (2008) The in-flow capture of superparamagnetic nanoparticles for targeting therapeutics. Nanomedicine-Nanotechnology Biology and Medicine, 4 (1). pp. 19-29. ISSN 1549-9634

Ma, AWK and Chinesta, F and Tuladhar, T and Mackley, MR (2008) Filament stretching of carbon nanotube suspensions. Rheologica Acta, 47 (4). pp. 447-457. ISSN 0035-4511

Medina, DI and Hallmark, B and Lord, TD and Mackley, MR (2008) The development of voidage and capillary size within extruded plastic films. Journal of Materials Science, 43 (15). pp. 5211-5221. ISSN 0022-2461

Ma, AWK and Mackley, MR and Chinesta, F (2008) The microstructure and rheology of carbon nanotube suspensions. International Journal of Material Forming, 1 (2). pp. 75-81. ISSN 1960-6206

Ma, WKA and Chinesta, F and Ammar, A and Mackley, MR (2008) Rheological modeling of carbon nanotube aggregate suspensions. Journal of Rheology, 52 (6). pp. 1311-1330. ISSN 0148-6055

Zheng, M and Skelton, RL and Mackley, MR (2007) Biodiesel reaction screening using oscillatory flow meso reactors. Process Safety and Environmental Protection, 85 (B5). pp. 365-371. ISSN 0957-5820

Zheng, MZ and Li, J and Mackley, MR and Tao, JJ (2007) The development of asymmetry for oscillatory flow within a tube containing sharp edge periodic baffles. Physics of Fluids, 19 (11). ISSN 1070-6631

Hornung, CH and Mackley, MR and Baxendale, IR and Ley, SV (2007) A microcapillary flow disc reactor for organic synthesis. Organic Process Research & Development, 11 (3). pp. 399-405. ISSN 1083-6160

Ma, AWK and Mackley, MR and Rahatekar, SS (2007) Experimental observation on the flow-induced assembly of Carbon nanotube suspensions to form helical bands. Rheologica Acta, 46 (7). pp. 979-987. ISSN 0035-4511

Embery, J and Graham, RS and Duckett, RA and Groves, D and Collis, M and Mackley, MR and McLeish, TCB (2007) Tearing energy study of "oriented and relaxed" polystyrene in the glassy state. Journal of Polymer Science Part B-Polymer Physics, 45 (4). pp. 377-394. ISSN 0887-6266

Hallmark, B and Hornung, C and Mackley, M (2007) The shape of things to come. The Chemical Engineer (791). pp. 32-34. ISSN 0302-0797

Yimsiri, P and Mackley, MR (2007) Microstructure and device performance of thin film light emitting polymers. Thin Solid Films, 515 (7-8). pp. 3787-3796. ISSN 0040-6090

Engmann, J and Mackley, MR (2006) Semi-solid processing of chocolate and cocoa butter - Modelling rheology and microstructure changes during extrusion. Food and Bioproducts Processing, 84 (2). pp. 102-108. ISSN 0960-3085

Engmann, J and Mackley, MR (2006) Semi-solid processing of chocolate and cocoa butter - The experimental correlation of process rheology with microstructure. Food and Bioproducts Processing, 84 (2). pp. 95-101. ISSN 0960-3085

Agassant, JF and Arda, DR and Combeaud, C and Merten, A and Munstedt, H and Mackley, MR and Robert, L and Vergnes, B (2006) Polymer processing extrusion instabilities and methods for their elimination or minimisation. International Polymer Processing, 21 (3). pp. 239-255. ISSN 0930-777X

Sonwai, S and Mackley, MR (2006) The effect of shear on the crystallization of cocoa butter. Journal of the American Oil Chemists' Society, 83 (7). pp. 583-596. ISSN 0003-021X

Chen, YW and Mackley, MR (2006) Flexible chocolate. Soft Matter, 2 (4). pp. 304-309. ISSN 1744-683X

Bustnes, TE and Kaminski, CF and Mackley, MR (2006) The capture and release of biomass in a high voidage fibrous microstructure: Mechanisms and shear stress levels. Journal of Membrane Science, 276 (1-2). pp. 208-220. ISSN 0376-7388

Hornung, CH and Hallmark, B and Hesketh, RP and Mackley, MR (2006) The fluid flow and heat transfer performance of thermoplastic microcapillary films. Journal of Micromechanics and Microengineering, 16 (2). pp. 434-447. ISSN 0960-1317

Rahatekar, SS and Koziol, KKK and Butler, SA and Elliott, JA and Shaffer, MSP and Mackley, MR and Windle, AH (2006) Optical microstructure and viscosity enhancement for an epoxy resin matrix containing multiwall carbon nanotubes. Journal of Rheology, 50 (5). pp. 599-610. ISSN 0148-6055

Smith, KB and Mackley, MR (2006) An experimental investigation into the scale-up of oscillatory flow mixing in baffled tubes. Chemical Engineering Research and Design, 84 (A11). pp. 1001-1011. ISSN 02638762

Yimsiri, P and Mackley, MR (2006) Spin and dip coating of light-emitting polymer solutions: Matching experiment with modelling. Chemical Engineering Science, 61 (11). pp. 3496-3505. ISSN 0009-2509

Valette, R and Mackley, MR and del Castillo, GHF (2006) Matching time dependent pressure driven flows with a Rolie Poly numerical simulation. Journal of Non-Newtonian Fluid Mechanics, 136 (2-3). pp. 118-125. ISSN 0377-0257

Hallmark, B and Mackley, MR and Gadala-Maria, F (2005) Hollow microcapillary arrays in thin plastic films. Advanced Engineering Materials, 7 (6). pp. 545-547. ISSN 1438-1656

Hallmark, B and Gadala-Maria, F and Mackley, MR (2005) The melt processing of polymer microcapillary film (MCF). Journal of Non-Newtonian Fluid Mechanics, 128 (2-3). pp. 83-98. ISSN 0377-0257

Collis, MW and Lele, AK and Mackley, MR and Graham, RS and Groves, DJ and Likhtman, AE and Nicholson, TM and Harlen, OG and McLeish, TCB and Hutchings, LR and Fernyhough, CM and Young, RN (2005) Constriction flows of monodisperse linear entangled polymers: Multiscale modeling and flow visualization. Journal of Rheology, 49 (2). pp. 501-522. ISSN 0148-6055

Arda, DR and Mackley, MR (2005) The effect of die exit curvature, die surface roughness and a fluoropolymer additive on sharkskin extrusion instabilities in polyethylene processing. Journal of Non-Newtonian Fluid Mechanics, 126 (1). pp. 47-61. ISSN 0377-0257

Reis, N and Harvey, AP and Mackley, MR and Vicente, AA and Teixeira, JA (2005) Fluid mechanics and design aspects of a novel oscillatory flow screening mesoreactor. Chemical Engineering Research and Design, 83 (A4). pp. 357-371. ISSN 02638762

Arda, DR and Mackley, MR (2005) Sharkskin instabilities and the effect of slip from gas-assisted extrusion. Rheologica Acta, 44 (4). pp. 352-359. ISSN 0035-4511

Bustnes, TE and Mackley, MR (2005) The capture and release of biomass using a high voidage fibrous filter (marked revision). Chemical Engineering Science, 60 (19). pp. 5206-5218. ISSN 0009-2509

Mulji, NC and Mackley, MR (2004) Flow Field Determination during the Slit Extrusion of Solid Chocolate. International Journal of Forming Processes, 7 (3). pp. 375-386. ISSN 12927775

Bustnes, TE and Kaminski, CF and Mackley, MR (2004) Direct visualization of flowing biomass capture and release within a fibrous matrix. Biochemical Engineering Journal, 18 (3). pp. 231-234. ISSN 1369-703X

Tuladhar, TR and Mackley, MR (2004) Experimental observations and modelling relating to foaming and bubble growth from pentane loaded polystyrene melts. Chemical Engineering Science, 59 (24). pp. 5997-6014. ISSN 0009-2509

Harvey, AP and Mackley, MR and Seliger, T (2003) Process intensification of biodiesel production using a continuous oscillatory flow reactor. Journal of Chemical Technology & Biotechnology, 78 (2-3). pp. 338-341. ISSN 0268-2575

Mulji, NC and Miquel, ME and Hall, LD and Mackley, MR (2003) Microstructure and mechanical property changes in cold-extruded chocolate. Food and Bioproducts Processing, 81 (2). pp. 97-105. ISSN 0960-3085

Liaw, MS and Mackley, MR and Bridgwater, J and Moggridge, GD and Bayly, AE (2003) Multilamellar vesicles in a commercial surfactant system. AIChE Journal, 49 (11). pp. 2966-2973. ISSN 0001-1541

Mackley, MR (2003) Process and product innovation. Journal of Chemical Technology & Biotechnology, 78 (2-3). pp. 94-97. ISSN 0268-2575

McKeown, SA and Mackley, MR and Moggridge, GD (2003) Shear-induced structural changes in a commercial surfactant-based system. Chemical Engineering Research and Design, 81 (A6). pp. 649-664. ISSN 02638762

Mulji, NC and Mackley, MR (2003) The Axisymmetric Extrusion of Solid Chocolate and the Effect of Die Geometry. International Journal of Forming Processes, 6 (2). pp. 161-177. ISSN 12927775

Chen, YK and Mackley, MR and Sayer, TSB (2003) Colour change and microstructure evolution of wet flowing paint when subject to shear. Chemical Engineering Science, 58 (12). pp. 2505-2514. ISSN 0009-2509

Ni, X and Mackley, MR and Harvey, AP and Stonestreet, P and Baird, MHI and Rao, NVR (2003) Mixing through oscillations and pulsations - A guide to achieving process enhancements in the chemical and process industries. Chemical Engineering Research and Design, 81 (A3). pp. 373-383. ISSN 02638762

Lele, AK and Mackley, MR and Galgali, G and Ramesh, C (2002) In situ rheo-x-ray investigation of flow-induced orientation in layered silicate–syndiotactic polypropylene nanocomposite melt. Journal of Rheology, 46 (5). pp. 1091-1110. ISSN 01486055

Watson, DJ and Mackley, MR (2002) The rheology of aqueous emulsions prepared by direct emulsification and phase inversion from a high viscosity alkyd resin. Colloids and Surfaces A-Physicochemical and Engineering Aspects, 196 (2-3). pp. 121-134. ISSN 0927-7757

Wannaborworn, S and Mackley, MR and Renardy, Y (2002) Experimental observation and matching numerical simulation for the deformation and breakup of immiscible drops in oscillatory shear. Journal of Rheology, 46 (5). pp. 1279-1293. ISSN 0148-6055

Stephens, GG and Mackley, MR (2002) Heat transfer performance for batch oscillatory flow mixing. Experimental Thermal and Fluid Science, 25 (8). pp. 583-594. ISSN 0894-1777

Agassant, JF and Baaijens, F and Bastian, H and Bernnat, A and Bogaerds, ACB and Coupez, T and Debbaut, B and Gavrus, AL and Goublomme, A and van Gurp, M and Koopmans, RJ and Laun, HM and Lee, K and Nouatin, OH and Mackley, MR and Peters, GWM and Rekers, G and Verbeeten, WMH and Vergnes, B and Wagner, MH and Wassner, E and Zoetelief, WF (2002) The matching of experimental polymer processing flows to viscoelastic numerical simulation. International Polymer Processing, 17 (1). pp. 3-10. ISSN 0930-777X

Rutgers, RPG and Mackley, MR (2001) The effect of channel geometry and wall boundary conditions on the formation of extrusion surface instabilities for LLDPE. Journal of Non-Newtonian Fluid Mechanics, 98 (2-3). pp. 185-199. ISSN 0377-0257

Lee, CT and Mackley, MR and Stonestreet, P and Middelberg, APJ (2001) Protein refolding in an oscillatory flow reactor. Biotechnology Letters, 23 (22). pp. 1899-1901. ISSN 0141-5492

Liang, RF and Mackley, MR (2001) The gas-assisted extrusion of molten polyethylene. Journal of Rheology, 45 (1). pp. 211-226. ISSN 0148-6055

Mackley, MR (2001) Technology and Terrorism. The Chemical Engineer . p. 725.

Lee, K and Mackley, MR (2001) The application of the multi-pass rheometer for precise rheo-optic characterisation of polyethylene melts. Chemical Engineering Science, 56 (19). pp. 5653-5661. ISSN 0009-2509

Thompson, MJ and Pearson, JRA and Mackley, MR (2001) The effect of droplet extension on the rheology of emulsions of water in alkyd resin. Journal of Rheology, 45 (6). pp. 1341-1358. ISSN 0148-6055

Lee, K and Mackley, MR and McLeish, TCB and Nicholson, TM and Harlen, OG (2001) Experimental observation and numerical simulation of transient "stress fangs" within flowing molten polyethylene. Journal of Rheology, 45 (6). pp. 1261-1277. ISSN 0148-6055

Lee, K and Mackley, MR (2000) The significance of slip in matching polyethylene processing data with numerical simulation. Journal of Non-Newtonian Fluid Mechanics, 94 (2-3). pp. 159-177. ISSN 03770257

Rutgers, RPG and Mackley, MR (2000) The correlation of experimental surface extrusion instabilities with numerically predicted exit surface stress concentrations and melt strength for linear low density polyethylene. Journal of Rheology, 44 (6). pp. 1319-1334. ISSN 0148-6055

Mackley, MR (2000) The Innovation Gap. The Chemical Engineer . pp. 16-17.

Mackley, MR and Moggridge, GD and Saquet, O (2000) Direct experimental evidence for flow induced fibrous polymer crystallisation occurring at a solid/melt interface. Journal of Materials Science, 35 (20). pp. 5247-5253. ISSN 00222461

Thompson, MJ and Mackley, MR and Nimmo, JA (2000) The high shear rheology of lithographic emulsions. Surface Coatings International, 83 (5). pp. 234-239. ISSN 1356-0751

Bower, C and Gallegos, C and Mackley, MR and Madiedo, JM (1999) The rheological and microstructural characterisation of the non-linear flow behaviour of concentrated oil-in-water emulsions. Rheologica Acta, 38 (2). pp. 145-159. ISSN 0035-4511

Mackley, MR and Spitteler, PHJ (1996) Experimental observations on the pressure-dependent polymer melt rheology of linear low density polyethylene, using a multi-pass rheometer. Rheologica Acta, 35 (2). pp. 202-209. ISSN 0035-4511

Book Section

Mackley, MR (2001) Shaping the Future in Polymer Processing. In: Emerging Themes in Polymer Science. Royal Society of Chemistry, pp. 215-222. ISBN 9780854048908

Conference or Workshop Item

Karapataki, Christina and Roth, Peter and Mackley, MR and Hallmark, B and Hornung, CH (2010) The Cambridge Disk Microreactor. In: Part 2B Poster Presentations 2010, March 2010, Department of Chemical Engineering and Biotechnology.

Anthony, RC and Rowan, CL and Mackley, MR (2010) The Rheology of Commercial Thickeners Used in Treating Dysphagia and Their Flow Through “The Cambridge Throat”. In: Part 2B Poster Presentations 2010, March 2010, Department of Chemical Engineering and Biotechnology.

Hornung, C.H. and Dorfling, C. and Hallmark, B. and Beaumont, R.J.J. and Fovargue, H. and Mackley, M.R. (2009) The application of plastic microcapillary films (MCFs) as heat exchangers in low-cost solar energy collectors. In: Seventh International Conference on Enhanced, Compact and Ultra-Compact Heat Exchangers, September 14t-18 2009, San Jose COSTA RICA.

Hassell, DG and Mackley, MR and Sahin, M and Wilson, HJ (2008) Experimental and computational identification of a polymer melt flow instability. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Medina, DI and Hallmark, B and Mackley, MR (2008) Using hollow microcapillaries to explore the extrusion rheology of polymer films. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Tuladhar, TR and Mackley, MR (2008) Filament stretching rheometry and break-up behaviour of low viscosity polymer solutions and inkjet fluids. In: Conference on Rheometry, APR 10-12, 2006, Cardiff, WALES.

Darton, NJ and Hallmark, B and Han, X and Palit, S and Mackley, MR and Darling, D and Farzaneh, F and Slater, NKH (2008) The in-flow capture of superparamagnetic nanoparticles for targeting of gene therapeutics. In: Conference on Biomagnetism and Magnetic Biosystems Based on Molecular Recognition Processes, SEP 22-27, 2007, Sant Feliu de Guixols, SPAIN.

Waldmeyer, JR and Mackley, MR and Renardy, M and Renardy, Y (2008) Numerical simulation of the deformation and break-up of droplets subjected to complex, time dependent strain rates. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Ma, AWK and Chinesta, F and Mackley, MR (2008) The rheology of carbon nanotube (CNT) suspensions: Experiments and modelling. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Scelsi, L and Auhl, D and Klein, H and Mackley, MR (2008) Rheo-optic flow-induced crystallization of polyethylene and Polypropylene within confined flow geometries. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Lord, TD and Embery, J and Tassieri, M and Butler, SA and Hine, P and Mackley, MR (2008) The rheology of optically transparent polystyrene blends filled with cross-linked polystyrene beads. In: 15th International Congress on Rheology/80th Annual Meeting of the Society-of-Rheology, AUG 03-08, 2008, Monterey, CA.

Collis, MW and Mackley, MR (2005) The melt processing of monodisperse and polydisperse polystyrene melts within a slit entry and exit flow. In: 40th International Symposium on Macromolecules, JUL 04-09, 2004, Paris, FRANCE.

Garcia-Morales, M and Partal, P and Navarro, FJ and Martinez-Boza, F and Mackley, MR and Gallegos, C (2004) The rheology of recycled EVA/LDPE modified bitumen. In: Annual European Rheology Conference (AERC 2003), SEP 11-13, 2003, Guimaraes, PORTUGAL.

Reis, N and Vincente, AA and Teixeira, JA and Mackley, MR (2004) Residence times and mixing of a novel continuous oscillatory flow screening reactor. In: 18th International Symposium on Chemical Reaction Engineering, JUN 06-09, 2004, Chicago, IL.

Harvey, AP and Mackley, MR and Seliger, T (2003) Process intensification of biodiesel production using a continuous oscillatory flow reactor. In: Process Innovation and Process Intensification Conference, SEP 08-13, 2002, EDINBURGH, SCOTLAND.

Allen, WR and Tiplady, CA and Butler, SA and Mackley, MR (2002) Rheological characterisation of estrous uterine fluid in the mare. In: 8th International Symposium on Equine Reproduction, JUL, 2002, FT COLLINS, COLORADO.

Tiplady, CA and Butler, S and Allen, WR and Mackley, MR (2001) Rheological characterisation of equine uterine fluid. In: 3rd International Conference on Equine Reproductive Medicine, OCT 27-28, 2001, LEIPZIG, GERMANY.

Harvey, AP and Mackley, MR and Stonestreet, P (2001) Operation and optimization of an oscillatory flow continuous reactor. In: 8th Conference on Novel Reactor Engineering for the New Millennium, JUN 24-29, 2001, BARGA, ITALY.

Mackley, MR and Skelton, RL and Smith, KB and Wise, NP (1994) Wet oxidation in a pulsed baffled tube. In: 1994 IChemE Research Event Symposium, JAN 05-06, 1994, LONDON, ENGLAND.